Our Services
At our facility, we take pride in being your dedicated BMW specialists, offering expert care tailored specifically to the engineering precision and performance standards of your BMW.
Whether you drive a classic 3 Series or a high-performance M model we understand what your vehicle needs to perform at its best.
services
Tuning and Performance Services
Tuning and performance-related services focus on enhancing a vehicle's power, responsiveness, fuel efficiency, and overall driving dynamics. These services may involve adjusting factory settings, upgrading components, or customizing systems to meet specific driving goals—whether for daily driving, racing, or off-road use.
Engine Tuning (ECU/ECM Remapping)
- Adjusts the engine control unit (ECU) software for better horsepower, torque, and throttle response.
- Can optimize performance for fuel economy, power, or specific driving conditions.
Performance Chip Installation
- Adds aftermarket modules that alter engine behavior (timing, fuel maps, boost levels).
- Enhances engine output and efficiency.
Upgraded Intake Installation
- Replaces factory intake system with high-flow units for increased air volume.
- Improves engine breathing, throttle response, and performance.
Exhaust System Upgrades
- Installs performance downpipes, mufflers, or full exhaust systems to reduce backpressure.
- Enhances horsepower and delivers a more aggressive exhaust tone.
Turbocharger/Supercharger Upgrades
- Increases engine air intake for significant power gains.
- Often includes supporting modifications like intercoolers and tuning.
Suspension Tuning
- Upgrades springs, shocks, struts, or sway bars to improve handling and ride quality.
- Can lower ride height for better aerodynamics or cornering.
Brake System Upgrades
- Installs performance pads, rotors, or calipers for better stopping power.
- Ideal for spirited driving, or track use applications.
Dyno Testing and Tuning
- Uses a dynamometer to measure engine output and fine-tune performance settings.
- Ensures optimal results after modifications or tuning.
Drivetrain Enhancements (LSD, Gears, Clutch)
- Upgrades limited-slip differentials, gear ratios, or performance clutches.
- Improves traction, acceleration, and overall performance under load.
Engine
Engine-related services involve maintenance, inspection, and repair tasks that help ensure an engine—whether in a car, motorcycle, truck, or other machinery—operates efficiently and reliably. Here’s a breakdown of common engine-related services:
Engine Diagnostics
- Uses computerized tools to identify issues via error codes (check engine light).
- Assesses performance problems, fuel efficiency, and emissions issues.
Oil and Filter Service
- Replaces old engine oil and filters to ensure proper lubrication and cooling.
- Only Liqui Moly oils and OEM filters are used that meet manufactures specifications and approvals.
Engine Rebuilding or Replacement
- Major service when internal components are worn or damaged.
- Can extend the vehicle’s life significantly.
Timing Chain Service
- Ensures the engine's valves and pistons operate in sync.
- Failure can lead to catastrophic engine damage.
Ignition Service
- Essential for efficient combustion and starting the engine.
- Worn plugs and coils can reduce fuel efficiency and cause misfires.
Fuel System Service
- Cleans injectors, intake valves, and combustion chambers.
- Replacement of fuel pump, filter, injector, and etc.
- Improves performance and fuel economy.
Coolant System Service
- Includes flushing the radiator and replacing coolant.
- Prevents overheating and protects against corrosion.
Air Filter Replacement
- Ensures clean air is delivered to the engine.
- Boosts power and fuel efficiency.
Valve Adjustments or Repairs
- Keeps the engine running smoothly by maintaining correct valve clearance.
- Essential for older engines or those with mechanical lifters.
Transmission
Transmission-related services involve the maintenance, inspection, repair, or replacement of components in a vehicle's transmission system—the part responsible for transferring engine power to the wheels. Proper care of the transmission is critical for smooth shifting, fuel efficiency, and overall drivability.
Transmission Fluid Service
- Drains and replaces old transmission fluid and filter.
- Helps prevent overheating, slipping, and gear wear.
Transmission Diagnostics
- Uses scan tools to detect trouble codes related to shifting or performance.
- Identifies internal or electronic transmission problems.
Clutch Service (Manual Transmission)
- Includes clutch plate replacement, flywheel resurfacing, or clutch cable/hydraulic system inspection.
- Necessary for smooth gear changes in manual vehicles.
Transmission Reseal
- Fixes fluid leaks by replacing seals or gaskets.
- Helps maintain proper fluid levels and prevent damage.
Transmission Replacement
- Replaces the entire unit when rebuilding is not cost-effective or possible.
- Restores full drivability and performance.
Differential
Differential-related services involve the inspection, maintenance, and repair of a vehicle's differential—the component that allows the wheels to rotate at different speeds, especially while turning. It plays a critical role in traction, stability, and smooth cornering, particularly in rear-wheel, front-wheel, and all-wheel-drive vehicles.
Differential Fluid Service
- Drains and replaces the gear oil (lubricant) in the differential.
- Prevents excessive wear, overheating, and gear damage.
Differential Inspection
- Checks for leaks, unusual noises (whining, grinding), and worn components.
- Includes inspecting seals, bearings, and gear condition.
Differential Reseal
- Replaces worn or leaking differential seals.
- Helps prevent fluid loss and contamination.
Differential Gear Replacement or Rebuild
- Involves replacing damaged gears, bearings, or shims inside the differential.
- Necessary when there’s severe wear, noise, or performance issues.
Limited-Slip Differential (LSD) Service
- May include special fluid or additive changes unique to LSDs.
- Ensures proper traction performance and prevents clutch pack wear.
Wheel and Tire
Wheel and tire-related services involve maintaining, repairing, and replacing the components that make direct contact with the road. These services are essential for safety, ride comfort, traction, handling, and fuel efficiency.
Tire Rotation
- Moving tires from one position to another (e.g., front to rear).
- Promotes even tire wear and extends tire life.
Tire Balancing
- Adds small weights to wheels to ensure even weight distribution.
- Eliminates vibrations at higher speeds and improves ride quality.
Wheel Alignment
- Adjusts the angles of the wheels (camber, caster, toe).
- Prevents uneven tire wear, improves handling, and ensures straight steering.
Tire Inspection
- Checks for tread depth, punctures, cracks, bulges, or uneven wear.
- Helps detect safety or performance issues early.
Tire Repair
- Fixes punctures (typically in the tread area) using patch or plug methods.
- Only safe if damage is within repairable zones.
Tire Replacement
- Installs new tires when old ones are worn, damaged, or outdated.
- Involves proper mounting, balancing, and disposal of old tires.
TPMS (Tire Pressure Monitoring System) Service
- Diagnoses or replaces faulty tire pressure sensors.
- Ensures accurate pressure readings and warning alerts.
Road Force Balancing
- Advanced balancing method using pressure rollers to simulate road conditions.
- Identifies issues like tire stiffness or wheel imperfections.
Suspension
Suspension-related services involve the inspection, maintenance, and repair of a vehicle’s suspension system, which includes components like shocks, struts, springs, control arms, and bushings. This system is responsible for absorbing road impacts, maintaining tire contact, and ensuring a smooth, stable ride with safe handling.
Suspension Inspection
- Checks for worn, damaged, or leaking parts such as shocks, struts, bushings, and ball joints.
- Identifies unusual tire wear, noises, or handling issues.
Shock and Strut Replacement
- Replaces worn or leaking shocks/struts that affect ride quality and vehicle control.
- Restores comfort and stability, especially during braking or cornering.
Control Arm and Bushing Service
- Repairs or replaces control arms and rubber bushings that connect suspension components.
- Eliminates clunking sounds, vibrations, and loose steering.
Ball Joint Replacement
- Replaces worn ball joints that allow for flexible steering and suspension movement.
- Crucial for safe steering and suspension articulation.
Sway Bar (Stabilizer Bar) Service
- Repairs or replaces sway bar links or bushings to reduce body roll in turns.
- Improves handling and cornering stability.
Coil Spring Replacement
- Replaces broken or sagging springs that support vehicle weight and maintain ride height.
- Ensures proper balance and alignment.
Strut Mount and Bearing Replacement
- Fixes worn strut mounts or bearings that cause noise or steering resistance.
- Supports proper steering and suspension performance.
Add a footnote if this applies to your business
Our Partners
This website uses cookies.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.